Fence Cleaning Des Moines, IA

The surface of wood fences accumulates dirt and grime, which can be unpleasant and contribute to the degradation of the wall and its integrity. It’s not difficult to clean it no matter how much you want to, whether using a power washer or cleaning it by hand.

Power Washing Wood Fences

The power washer makes cleaning a wooden fence much faster than handwashing, but it can damage the wall if not used carefully. Make sure your wooden fence gets adequately powered washed by following these steps:

  1. Wire brush is recommended for removing caked-on gunk.

Occasionally, power washing will not remove certain kinds of grime. You may want to scrub them off before and after. Make sure you remove caked-on grime and mud with a wire brush before power washing your wood fence. If you have a painted border, you must be incredibly gentle.

  1. Use a garden hose to rinse your wooden fence.

Spray your wood fence with your garden hose to prepare it for pressure washing. If you want to clean off some dirt on the surface, you need to use a medium-high pressure on the hose.

  1. Don’t forget to prepare your pressure washer.

Using pressure to wash a wood fence should be done, so you don’t damage it. The psi of your pressure washer should not exceed 1500-2000. A pressure washer tip that fans out water are also a good idea. It is a good idea to use a tip with a 25-degree angle.

  1. Wood fences should be cleaned using long, even strokes.

Using long and even strokes, you should pressure wash your wooden fence from about 2 feet away. Follow the wall until no dirty runoff from it can be seen. Continue spraying until the dirt is no longer visible from right to left.

Make sure that you aren’t pointing the power washer at the same spot for too long at a time. When water is constantly sprayed in one place, your wooden fence may suffer damage. The reason why you should clean your wall with long strokes is that it carries less water.

A Guide for Getting Rid of Green Mold, Algae, And Fungus

There may still be fungus on your wooden fence after you pressure wash or hand wash it. The following steps will help you remove them:

  • Algae and mold removal.

The presence of mold and algae can damage your wood fence, and they can leave behind green stains if you do not remove the growths. Combine one part chlorine bleach with two parts water to remove these growths. This mixture should be used to scrub the mold or algae off your fence with a plastic bristle brush. Rinse all sections of the lawn where mold or algae were after they have been removed with your garden hose following their removal.

  • Get rid of moss and mildew.

Your fence will be damaged and unsightly by moss and mildew, just like mold and algae, which are detrimental. Getting rid of these growths requires a different approach. A mixture of 1 gallon of water and 12 cups of vinegar helps eliminate moss and mildew. Let the mixture sit on the wood fence for 15 minutes after applying the mixture with a sponge. Once the moss or mildew has been removed, scrub it off with a plastic bristle brush. In the end, you will use your garden hose to rinse off the parts of the cleaned surface.

The time may be suitable for a fence replacement if your wood fence becomes unsightly after washing it. You can have a brand new fence installed by Des Moines Gutter Cleaning. With how many years of experience installing beautiful new borders in the Iowa area, we can take care of any project.

Are you looking for cleaning services that can clean your fence? Contact us today!