If you have a wood fence, you may be wondering how to clean it. Several methods are available, including a pressure washer, a garden hose, an all-purpose cleaning solution, and a deck scrub brush. Listed below are the four most common methods. Use the one that works best for your situation. After choosing the method, you must protect any plants in your yard.
There are many ways to clean a fence. While you can hire a professional cleaner, you can also use a garden hose to do the job yourself. After washing with the hose, you can use a garden hose to rinse off the remaining surface dirt. Apply medium to high pressure to get rid of any remaining dirt. Once the fence is dry, wipe it with a clean cloth to remove dirt and grime.
The first step in cleaning a fence is to wet the boards to open the wood grain and remove loose debris. Next, a garden hose can rinse the wall with a mild solution. This will remove any stubborn dirt and stains. You can also use a small scrub brush to scrub them away for more stubborn stains. If your fence is made of wood, rinse it from the top down with the hose nozzle at least six inches off the ground.
Using a pressure washer to clean a fence is a simple and effective way to rejuvenate the old wood. Dirt, mildew, and other debris tend to adhere to the surface of a wall and make it look not very interesting and faded. It is crucial to pressure-wash the fence before applying stain or paint since these substances can damage the fence material and cause it to warp or break.
To use a pressure washer:
- Position yourself about three feet away from the fence to ensure a good cleaning.
- Spray the wall with long, continuous lines, following the wood grain.
- Start by covering a few boards simultaneously, then increase the pressure as needed.
- Don’t spray too close to sensitive plants, as this could cause them damage.
- Always wear protective clothing and protect any plants nearby.
All-purpose cleaning solution
Whether your fence is made from wood or vinyl, it can become dirty. Whether grey from age or covered with mold, algae, and mildew, the cleaning process can help restore the look of your fence. There are two basic wall cleaning methods: pressure washing and soft washing. Each way is effective, but both require some elbow grease. For best results, try cleaning your fence in sections.
To clean fence boards, you can use Simple Green Oxy Solve. Mix it with two gallons of water. Then, use a scrub brush or sponge to apply the solution. Let the solution sit for at least five minutes. Could you not allow it to dry? Then, rinse it with a garden hose using low pressure. If you have a filthy area, spot treat it.
Deck scrub brush
The quickest way to clean a fence is with a scrub brush. With a scrub brush, you can get rid of the dirt and grime stuck to it. The fence cleaner you use can easily be scrubbed into the fence to eliminate dirt and grime. This method will also allow you to use a pressure washer to remove the toughest grime. If you’re unsure how to clean a fence effectively, try using a product like a Mold Armor. You can find it on Amazon, and it’s great for deep cleaning wooden fences. This product will keep your bar looking new for as long as you want.
If you’re worried about the staining caused by mildew, you can try a solution of two ounces of detergent and eight ounces of oxygen bleach. This solution will clean the fence with streak-free results. You can also add a little baking soda and scrub with the answer. For more convenience, use a scrub brush with a long pole. You can also buy a deck scrub brush that has a long bar.